 |
| Car Rear View Camera System |
Key Specifications/Special Features:
- Features:
- With 7-inch touch screen
- With touch buttons control
- With IR remote control
- With loudspeaker, can play the audio from camera or outside input, volume can be adjusted One VGA image input, resolution: 800 x 600 (60Hz), one VGA audio input
- With touch screen signal output, under the state of VGA, when it’s connected to computer through USB, the touch screen signal transferred to USB signal for touch control
- Support 4 cameras inputs, can have quad picture
- Each camera can set mirror/normal image separately
- Single, dual, triple, quad, trefoil, Y-split image and PIP functions are available
- Four trigger wires, can switch picture automatically, the priority of triggers can be set up
- Reverse warning yardstick
- Once a trigger wire is activated, image automatically switches to its relative camera
- Two video signal outputs: simultaneous video output and recording video output, one audio signal output
- Operates from 10 to 32V
- Applicable to both indoor/outdoor security systems and vehicle rear view systems
- New style, multiple functions, easy installation and convenient operating
- Specifications:
- Image device: 1/3-inch Sony Super HAD CCD
- TV system: CCIR/EIA
- Effective pixels: PAL (H x V) 500 x 582/510 x 492 pixels
- Sensing area (H x V): 4.9 x 3.7mm
- Synchronization system: internal
- Resolution: 420TV lines
- 500 x 582/510 x 492 pixels
- 500 x 582/510 x 492 pixels
- Horizontal synchronization frequency: 15.625/15.734kHz
- Vertical synchronization frequency: 50/60Hz
- Minimum illumination: 0 Lux/F1.2 with IR
- Video output: 1.0Vp-p, 75 Ohms
- Microphone: optional
- Gamma consumption: 0.45
- S/N ratio: better than 48dB
- White balance: automatic
- Image device: LG
- Electronic shutter: 1/60 (CCIR)/1/50 (EIA) to 1/10,000 seconds
- BLC: automatic
- Current consumption: 300mA
- Power supply: 12V DC
- Operating temper
0 comments:
Post a Comment